How to use it
- Enter the slab length and width in feet.
- Enter the thickness. Most patios and shed bases are 4 inches; garages and shops are 5 to 6 inches.
- Pick reinforcement, base and finish, then set your area.
Slab cost formula
Cubic yards = length × width × (thickness ÷ 12) ÷ 27, plus waste
Total = concrete + short-load fee + (base + steel + finish) × area + labor × area
Example: 30 × 30 slab, 4 inches
900 sq ft needs 12.22 cubic yards with waste. Concrete at $165 a yard is $2,017. Base and mesh add $1,170 and labor adds $3,600. Total: about $6,787, or $7.54 per sq ft.
Cost of common slab sizes
4 inches thick, installed, average US prices.
| Size | Area | Concrete | Installed cost |
|---|---|---|---|
| 10 × 10 | 100 sq ft | 1.2 yd³ | $600 – $1,200 |
| 12 × 12 | 144 sq ft | 1.8 yd³ | $864 – $1,728 |
| 16 × 20 | 320 sq ft | 4.0 yd³ | $1,920 – $3,840 |
| 20 × 20 | 400 sq ft | 4.9 yd³ | $2,400 – $4,800 |
| 24 × 24 | 576 sq ft | 7.1 yd³ | $3,456 – $6,912 |
| 30 × 30 | 900 sq ft | 11.1 yd³ | $5,400 – $10,800 |
| 30 × 40 | 1,200 sq ft | 14.8 yd³ | $7,200 – $14,400 |
| 40 × 60 | 2,400 sq ft | 29.6 yd³ | $14,400 – $28,800 |
Very small slabs often cost more per square foot because many contractors charge a minimum of $1,500 to $2,500.
Slab cost by thickness
| Thickness | Coverage per yard | Typical use |
|---|---|---|
| 4 inches | 81 sq ft | Patios, walkways, shed bases |
| 5 inches | 65 sq ft | Driveways, hot tub pads |
| 6 inches | 54 sq ft | Garages, shops, RV pads |
Ways to lower the cost
- Order one full truck instead of two small loads to avoid short-load fees.
- Do the site prep and form work yourself.
- Pick a broom finish instead of stamped or colored.
- Get at least three quotes and compare the price per square foot.
Questions people ask
How much does a concrete slab cost per square foot?
Most 4-inch slabs cost $6 to $12 per square foot installed. Reinforced slabs run about $7 to $14 and decorative slabs $12 to $28.
How much does a 30x30 slab cost?
A 30x30 slab is 900 square feet. At 4 inches thick it needs about 11 cubic yards and usually costs $5,400 to $10,800 installed.
How much does a 40x60 slab cost?
A 40x60 slab is 2,400 square feet. At 4 inches it costs roughly $14,400 to $28,800 installed. At 6 inches for a shop, expect more.
Should I use rebar or wire mesh?
Wire mesh or fiber is fine for most patios and walkways. Use rebar for driveways, garages, and any slab that will carry heavy loads.
How thick should a slab be?
4 inches for foot traffic, 5 inches for cars, and 6 inches for trucks, RVs or heavy equipment.
More concrete calculators
- Concrete Cost CalculatorThe all-in-one estimator
- Price per Yard CalculatorReady-mix with PSI and add-ons
- Pad Cost CalculatorShed, hot tub and AC pads
- Driveway Cost CalculatorNew and replacement driveways
- Patio Cost CalculatorPlain, colored and stamped
- Foundation Cost CalculatorSlab-on-grade with thick edges
- Removal Cost CalculatorBreak up and haul away
- Floor Cost CalculatorGarage, basement, polished
- Delivery Cost CalculatorTruck, pump and short-load fees
- Footing Cost CalculatorCost per linear foot
- Block Wall Cost CalculatorBlocks, grout and labor
Estimates use 2026 US averages and are for planning only. Real prices depend on your contractor, site and local market.